40x4 Parallel LCD Display, White


40x4 Parallel LCD Display, White
Stock Number: 35053 OP
 Review Average:  
 Number of Reviews: 2
 View ReviewsReview this item
$19.95

Did we sell out of a part you need?
You may be able to purchase it directly from our overseas supplier.

Please note the following restrictions:
   •   $50 minimum per line item
   •   $100 minimum per order

To inquire, contact:

Supplier: Aqua Jiang
Email: aquajiang1@outlook.com

When emailing, please use “MPJA Customer” as the subject line and include the MPJA stock number and quantity needed. The supplier will respond with pricing, lead time and shipping costs.



SHARE
    
     Email this to a friend     

Detailed Description

View PDF Data Sheet
DATA SHEET


P/N: LCM4004A1
Resolution: 4 Lines X 40 Character
Char. Size: 2.78 X 4.89mm
Dot Size: .50mm X .55mm
Specifications/Features: 5 X 7 + cursor with white characters on deep blue background. (Negative-Transmissive)
5V LED backlite.
Dot Matrix display with built in SPLC780 controller (equivalent HD44780) & drivers. 4/8 Bit Parallel interface.Requires single +5V for logic and LCD drive.
White LED Backlight: 5V/<150mA Powered Separately.
L: 7-1/2: H: 2-1/8" T: 1/2" WT: 0.3


California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov



 Product ReviewsClick here to review this item
Beautifully Brilliant
This is a great display with good response time and bright white characters on a blue background. I found no contrast adjustment necessary. Like many 4x40 displays, it uses 2 HD44780 LCD controllers, and has two E enable pins that control the LCDs lines 1/2 and 3/4. Most software compilers only allow one E pin definition, so external logic and an extra uC control pin is required to route text to the desired lines. But this is simple enough to do and a small inconvenience in return for the 160 characters of display.
- Bob S., CO
 
Good display for arduino
Once you have it rigged up correctly, this is a great device to use with the arduino system.
 

Recently Viewed Items